EXPLORE THE LIMIT OF THE DEEP SNOW, DEEP TREE RIDING, AND EXPERIENCE HIGH HORSEPOWER TURBO BIG HILL CLIMBING. EVERYTHING ON THIS SYSTEM IS GEARED TOWARD HELPING YOU TO REACH HIGHER AND PERFORM BETTER.
The YETI 137 MT capture the optimal combination of floatation and grip to get the extra horse power. With a wide track on the new narrow rail design, it provides the maximum grip, agility and output that allows the track to operate at a lower tension. It also smooths out power transfer in sharp turns or on steep side hills. Its versatility makes it the go-to choice for those seeking to tackle mountain snows and deep tree rides confidently.
A 12.5-inch wide track on 5.5-inch narrow rail chassis gives riders more track floatation with the agile feel of a narrower system.
2.5-inch paddles for bringing better lift and traction in deep snow.
Optimized internal/external sprockets allow lower track tension for increased grip even in the deepest snow.
A stronger chassis with local reinforcement to dissipate the stress under high load.
ELKA SHOCK - STAGE 3
Allows low speed compression adjustment to adapt different types of riders.
2.86 NO-SLIP DRIVERS
Higher load capacity at lower track tension to avoid ice buildup.
An industry first “SOFT STRUT” providing 1/2'' of movement adding compliance under heavy load without affecting deep snow performance.
DUAL-PISTON CALIPER BRAKES
HAYES pre-bleed brake system to ensure ideal brake performance.
CAMSO SNOW BIKE TRACK
Lightweight 137-inch track, 12.5 inches wide and deep 2.5 inch lugs.
PRE-BLEED BRAKE SYSTEM
Comes from the factory with a 11mm master cylinder calibrated with brake caliper. Progressive and smooth brake feel. Reduced installation time without bleeding needed!
DIMENSIONS & WEIGHT
Estimated Dry Weight-Front
Estimated Dry Weight-Rear
Camso Snowbike Track
CHASSIS & DRIVE SYSTEM
Carbon Fibre/NEW Clear gel coat
Automatic Chain Tensioner
NEW Hayes V32 - Dual Piston Caliper, sheilded rotor with anti-rattle pad clip
NEW Hayes pre-bled, Right Hand, 11mm piston
Syncrodrive, Belt drive system
Mitsuboshi 28 mm Width/896 mm length
Quick Access Belt Drive
DID520VOX 60 or 62 Link (master link)
1 1/16" Hex, Titanium, 7 tooth Anti-ratchet sprocket
Drive Shaft Sprocket
16 tooth- Splined
Upper Syncrodrive Belt Drive Gear
41 tooth- Splined
Lower Syncrodrive Belt Gear
47 tooth- Splined
Hardware & Fasteners
Titanium, Anodized Aluminum & Stainless Steel
Front & Rear Shock
Elka shock Stage 3
Titanium reactor Arms
Front Suspension Arm
Powder coated steel w/ STRENX reinforcements
16.0" (40,64 cm)
YETI Soft Strut
Parabolic design, 20" Radius
Hardox, Zinc Plated
“We rode a 137 MT system which actually handled like the 129 SS model we come to love so much. We’re talking more floatation, about 20% more power and 20% more nimbleness than the same size 2019 model.”
— Toby Till, YETI SnowMX dealer